A Beginner's Guide for Using E-cigarettes
Electronic cigarettes control the output and working status of smoke through high-tech silicon chips and airflow sensors. The nicotine is atomized, and the solution containing nicotine and flavor is atomized into particles, which are absorbed through the lungs while exhaling simulated smoke. When many people use it for the first time, the performance of the electronic cigarette device may be degraded due to improper operation. The following is a novice operation guide for e-cigarettes.
Steps for usage
(1) Take out the atomizer and assemble it with the host to ensure that the overall structure of the atomizer is not loose.
(2) Turn the steel ring at the bottom to close the air inlet of the atomizer, open the top cover of the atomizer, and pour the smoke oil into both sides of the glass chamber of the atomizer. The volume is about 80%. Inject into the round hole of the atomizing core in the middle of the atomizer.
(3) Close the top cover and open the air inlet, let it stand for 5 minutes, and wait for the core to be fully wetted.
(4) Press the ignition key (large button) five times to turn it on, and adjust the power required by the atomizer resistance (marked on the atomizer core) to watts (W) for normal use. Ignition in oil will burn the core.
Calculation of used power
The power obtained from the finished atomizer is 60%~70%
The power obtained by the DIY atomizer is 70%~80%
The greater the power, the greater the smoke and the greater the core loss. The lower the power, the better the taste and the lower the core loss.
Other precautions
(1) There may be oil leakage in the first refueling of the atomizer, just wipe it clean with a paper towel; if the oil leaks continuously, check whether the atomizer is tightened or contact customer service for consultation.
(2) If the e-liquid is lower than the oil inlet (the white round hole on the atomizer), it must be refueled in time, otherwise it is easy to burn the core; if it is not used for a long time, you can keep it in this position. Do not store too much e-liquid in this position. Inside the oil tank.
(3) The atomizer core should be replaced every 7 to 14 days, otherwise, there will be a mushy smell which will reduce the user experience. If necessary, please contact customer service to purchase.
(4) It is recommended to use the 1A charging head with the attached data cable to charge the host. The specific charging time can be according to the electronic cigarette manual. Do not overcharge to ensure safety. It should be noted that insufficient power of the computer's USB interface will make charging much slower.
(5) The choice of e-liquid can be alternately added to the oil bin according to your taste needs, so you don't have to worry too much about the problem of odor.
When purchasing e-cigarettes, we also need to consider their quality and service life to prevent the purchase of inferior e-cigarette products. If you still have doubts about the use of e-cigarettes after reviewing the above, you can contact us for professional solutions.
As a professional manufacturer of electronic cigarette products, we have accumulated rich design and production experience in this field. We have a professional production team and a strict quality inspection system, and strictly control the quality of all links from product design to export. At the same time, we can also provide corresponding customized services and effective solutions according to customer needs. If you are interested in our e-cigarettes, please contact us immediately!
