Common Mistakes in the Use of Electric Cigarettes
The electric cigarette device composed of only two main parts, the atomizer, and the host, may seem simple, but it is inevitable that some wrong operations will occur in actual operation. The following erroneous operations often lead to the shortening of the life of the electric cigarette device, which directly affects the use effect of the electric cigarette.
1. Use the oil storage atomizer directly after filling it with oil
Many users can't wait to use it after getting the oil storage atomizer for refueling. This will make the atomizer core unable to fully absorb the e-liquid, and the oil-conducting cotton cannot reach a completely wet state. If the core of the oil storage atomizer that does not pass through the core is directly energized after being filled with oil, it is likely to cause the cotton inside the atomizer to be burnt. After the oil storage atomizer is filled with oil, wait a few minutes for use, which can ensure the service life of the atomizer core.
2. The top oil atomizer forgets to close the air inlet opening when refueling
For most of the top oil injection atomizers that do not have the oil circuit sealing function, the air inlet opening should be closed during the oil injection operation to ensure that the oil tank pressure is not leaked. If the air intake opening is not closed, only cotton can be used to block it, which may easily cause the possibility of e-liquid leakage.
3. Blow air into the atomizer when the device starts
Whether it is an oil storage atomizer or a dripping atomizer, blowing into the atomizer to let the smoke be discharged from the air inlet does have a cool effect, but this will make the smoke discharged from the air inlet atomize condensate is generated at the top of the device and the equipment. For the oil storage atomizer, excessive blowing can easily cause the e-liquid to be pressed out and cause oil leakage.
4. Use batteries with different power levels
When using high-power devices in series, using two batteries with different power levels will cause damage to the low-power battery and cannot guarantee the stable output of the device. The use of different brands of batteries, the difference in incapacity, and the difference in discharge capacity will also make the equipment work unstable. The most important thing is that such an operation is very likely to be dangerous.
5. Forgetting to turn off the device when going out and carrying
When the electric cigarette needs to be carried with you, be sure to shut down the device or lock the keys. For some mechanical devices that do not have a locking function, remove the battery if necessary. In this way, the embarrassment of smoking from the trouser pocket can be avoided, and the safety of the device when it is carried around can also be ensured.
6. When the equipment is not in use, place it randomly
When the electric cigarette device is not in use, the device must be properly placed, especially the atomizer must be placed vertically to ensure that the atomizer will not cause oil leakage due to side placement. When the atomizer is not used for a long time, it is also necessary to discharge the smoke oil in the atomizer to ensure that the atomizer core is not damaged by prolonged soaking.
7. Use e-cigarettes for too long
Many e-cigarette users tend to smoke e-cigarettes continuously when they become addicted to cigarettes. When e-cigarettes are used frequently and continuously, the e-cigarette core may burn due to overheating. Moreover, too frequent use will cause the atomizer and host equipment to overheat, and the e-cigarette battery will also cause a certain degree of damage due to continuous discharge.
8. Use beyond the adaptable power of the atomizer core
Most of the finished atomizer cores will have the logo of the adaptable power. If the adaptable power is exceeded, it is likely to cause the atomizer core to burn and affect the service life of the atomizer core. Even for DIY atomizing cores, the too-high output power will cause the smoke to overheat and the possibility of atomization burning.
In the process of using e-cigarettes, you must develop correct operating habits, and enjoy the fun of using e-cigarettes while ensuring the stable operation of the equipment. If you want to learn more about e-cigarettes after reading the above, you can contact us for more professional solutions.
With excellent R&D technology and high-quality products, we have become one of the leading e-cigarette manufacturers. We put the actual needs of customers in the first place. The professional production team and strict quality inspection system can control the quality of the products in an all-around way. At the same time, we can improve the thoughtful one-stop service and effective solution technology. If you want to buy our disposable e-cigarettes, please contact us immediately!
