A Complete Guide for the Proper Care of E-cigarettes
The maintenance of e-cigarettes during use is a big problem. Good use habits can prolong the service life of e-cigarettes and save costs for themselves. By understanding the following complete guide for proper maintenance of e-cigarettes, you can reduce the probability of improper operation.
Regularly wipe the battery contacts and the positive and negative poles of the battery inside the host
Although most of the battery contacts inside the main unit are gold-plated or silver-plated, oxidation is still unavoidable. Wipe the battery contacts regularly, and clean the positive and negative electric carbon of the battery, to ensure the normal current output of the battery, and to ensure that the host can maintain the best output state at any time.
The host electrode needs to be cleaned frequently, and pay attention to maintenance
In fact, the electrode interface part is the most problematic part of the host. Cleaning the oxide of the electrode part during daily use can ensure a smooth connection between the host and the atomizer.
At the same time, if the host is not used for a long time, it is recommended to remove the atomizer. In particular, the oil drip atomizer with a long positive screw must be removed in time to reduce the pressure of the atomizer on the electrode of the host.
Replace the battery in the host in time, don’t wait for a weak current to be displayed before replacing it
It seems that every user knows how to replace the battery in time, but it is not. Due to the sufficient series voltage of dual-battery devices, the battery replacement frequency will be slower. But for a single-battery host, the continuous high-power output will consume battery power quickly. The single battery after power consumption cannot reach the high power output capacity set by the device, which will directly affect the user experience.
Pay attention to cleaning the condensate or smoke oil near the host interface
It is inevitable that the condensate will accumulate or leak during the use of the atomizer. Even if these liquids are handled, damage to the host can be effectively avoided. If it is not handled in time, the condensate will corrode the screws and other metal parts on the top of the mainframe. Even for some mainframes without electrode leakage protection, the liquid may flow into the mainframe and cause greater damage to the mainframe.
It is recommended that when not in use, take off the cartridge, store the stick and cartridge separately, and do not assemble it. And check whether there is any condensate in the contact area of the smoke bomb, and wipe it clean in time.
Place the e-cigarette correctly
E-cigarettes should be placed according to a principle. When there is e-liquid in the atomizer, the cigarette holder should be placed upwards, and when there is no e-cigarette, it should be relatively random. But it is best not to stand upside down the electronic cigarette to prevent the remaining smoke oil in the atomizer from flowing out.
Pay attention to frequent maintenance of lithium-ion batteries
The maintenance of lithium-ion batteries is more important, because e-cigarette batteries are a major component, and lithium-ion batteries should be charged after they are exhausted as much as possible.
Fully charge once, do not cut off the power halfway, take out the lithium-ion battery within half an hour after being fully charged, and turn off the power of the e-cigarette when not in use for a long time. Single-mouth smoking should not be too long to prevent overheating of the lithium-ion battery from affecting the life of the lithium-ion battery.
Prevent the atomizer from producing a burnt smell
The core of the atomizer is the atomizing core, which is composed of a resistor, an oil guide rope, and some accessories. The most common problem with the atomizer is that the atomizer produces a burnt smell. The reason is that the resistance heating burns the oil guide rope. Therefore, during use, pay attention to the remaining amount of e-liquid, and do not dry it.
Adjustable pressure engine room should adjust the voltage appropriately, don't pursue high voltage. If you want to pursue large smoke, you must pay attention to the smoke oil. Generally, when the smoke oil is more than 2/3, it is not easy to produce a burnt smell with the 5-6V voltage. As the smoke oil decreases, the voltage should be slowly reduced.
Correctly handle the phenomenon of e-liquid leakage
Regarding some handling of oil spills and oil in the smoke, conventional atomizers generally have an air guide hole at the bottom to guide air. But after a long time, there will be a little smoke oil (but it will not leak to the fuselage, and it will not be felt outside).
It is recommended to separate the lithium-ion battery and the atomizer every time you add the smoke oil and wipe it with a paper towel. Because usually add smoke oil about once a day, rub it once a day.
There is oil in the place where the cigarette holder is in contact with the mouth. The reason may be that the oil was added to the cigarette outlet by mistake. Just wipe it with a paper towel; the smoke has oil but there is no oil at the cigarette holder. The reason is that there is oil in the smoke outlet. The treatment method is to remove the atomizing core and use a paper towel to rub it into a thin strip and extend it into the smoke outlet to suck up the smoke oil.
If you want to learn more about the maintenance of e-cigarettes after reading the above content, please contact JOECIG for a comprehensive solution.
With excellent R&D technology and high-quality products, we have become one of the leading e-cigarette manufacturers. We put the actual needs of customers in the first place. The professional production team and strict quality inspection system can control the quality of the products in an all-around way. At the same time, we can improve the thoughtful one-stop service and effective solution technology. If you want to buy our disposable e-cigarettes, please contact us immediately!
