The 5 Most Important Issues to Pay Attention to when Using E-cigarettes
The popularity of e-cigarettes is getting higher and higher, and many smokers have begun to accept e-cigarettes. It is inevitable that some mistakes will occur when using e-cigarettes for the first time, even if you refer to the instructions. These wrong operations will often reduce the quality of e-cigarette use experience, and even affect users' understanding and perception of e-cigarettes. JOCEIG will share with you the following issues that require the most attention when using e-cigarettes.
1. About the choice of battery
Products such as small cigarettes with built-in batteries do not naturally need to worry about this problem. The battery warning card can be seen in the packaging of most high-power host products. The use of broken batteries will cause certain safety hazards.
In fact, the most common mistake novices make is the choice of battery. Low battery discharge capacity will directly affect the output capacity of the host. Only by choosing a regular power battery can high-power equipment play its true level.
2. Turning on without adding smoke oil may cause the atomizer core to burn
Many host-type package products separate the atomizer from the host for packaging and arrangement and to prevent users from misoperation. If the main engine is combined with an atomizer without refueling, unintentional pressing of the ignition button after the main engine is turned on may cause the atomizer core to burn. The insulating tape added to the bottom of the pod product is also to prevent the inadvertent triggering of the pneumatic switch from causing damage to the atomizer core.
3. Add smoke oil to the atomizer and use it directly, which will cause the atomizer core to burn
Wet the atomizer core before filling the new atomizer, or let the atomizer stand for a period of time before using it after refueling, and there are also such reminders in the packaging of many products. However, it should be noted that the waiting time required for different atomization cores is different. At the same time, the atomizer needs to be placed vertically. It is recommended that no matter what kind of atomizer, the standing time is more than five minutes.
4. The problem of direct use without adjusting the power after the main unit and the atomizer are assembled
Most of the atomizers in the kit are finished atomizers, and the atomizer core needs to be used within a certain power range to have an excellent taste and smoke performance. At present, the factory power of most mainframes will be at the lowest value. If the mainframe power is not adjusted, the atomizer will have little or no smoke, and some high-power devices will be preset at the highest power value at the factory, and the power is directly adjusted. Ignition will burn the atomizer core.
5. Failure to charge e-cigarette devices with a low battery will affect the experience
Most e-cigarette products will not be fully charged when they leave the factory. Many e-cigarette devices have only a small amount of power. Direct use may cause the e-cigarette device to fail to reach its expected state due to insufficient output voltage. It is recommended that novice users charge the device as soon as they get the e-cigarette device to get a better experience.
If you want to learn more about e-cigarettes after reading the above, JOCEIG, as an expert on e-cigarettes for many years, can provide you with some professional advice to a certain extent.
JOCEIG is an experienced e-cigarette manufacturer, and our aim is to put the needs of customers first. We have a professional production team and a strict quality inspection system, which can control the quality of our products in an all-round way. Our products are sold worldwide and have received a lot of praise and trust from users. If you are interested in our e-cigarettes, please contact us immediately!
